Week14

Week14

Week14 期末程式碼

aduino



void setup(){
  Serial.begin(9600);
  pinMode(12, INPUT_PULLUP);
  pinMode(5, INPUT_PULLUP);
  pinMode(3, INPUT_PULLUP);
  pinMode(0, INPUT_PULLUP);
  pinMode(13,OUTPUT);
 
}
void loop(){
  int a=0;
  if(digitalRead(12)==LOW)a|=0x01; // Serial.println("up");
  if(digitalRead(5)==LOW) a|=0x02;//Serial.println("down");
  if(digitalRead(3)==LOW) a|=0x04;//Serial.println("left");
  if(digitalRead(0)==LOW) a|=0x08;//Serial.println("right");
  Serial.write(a);
 
  if(millis()%1000<500) digitalWrite(13, HIGH);
  else digitalWrite(13,LOW);
  delay(20);
}

processing.

import processing.serial.*;

Serial myPort;

void setup(){

  size(255+80,200);

  myPort=new Serial(this,"COM4",9600);

  

}

int posX=0;

int posY=0;

void draw(){

  background (255);

  int a=0;

  if(myPort.available()>0) a =myPort.read();

  if( (a&0x01)==0x01)posY+=10;///{println("up");}else println("no up");

  if( (a&0x02)==0x02)posY-=10;

  if( (a&0x04)==0x04)posX+=10;

  if( (a&0x08)==0x08)posX-=10;

  fill(#ff0000);rect(posX,posY,80,50);

  

}

week14

void setup(){

  pinMode(13,OUTPUT);

}

void loop(){

  int value=analogRead(A0);

  digitalWrite(13, HIGH);

  delay(value);

  digitalWrite(13, LOW);

  delay(value);

   

}

Week14

旋鈕

加入後可用來調頻、音樂大小聲..等

小精靈進度：

Ghost可以亂跑，預計再加入更多隻
簡化地圖，讓判斷更順暢
解決小精靈會卡圖的問題

Week14_楊育維_01160093

1. 目標: 旋鈕 (可變電阻) Analog Input
http://arduino.cc/en/pmwiki.php?n=Tutorial/AnalogInput

void setup(){

   pinMode(13, OUTPUT);

}

void loop(){

  int value = analogRead(A0);

  digitalWrite(13, HIGH);

  delay(value);

  digitalWrite(13, LOW);

  delay(value);

}

***利用旋鈕讓P語言方塊去結合移動***

process:

import processing.serial.*;

Serial myPort;

void setup(){

   size(255+80,200);

  myPort = new Serial(this, "COM5", 9600); 

}

int posX=0;

void draw(){

  background(255);

  fill(#ff0000);rect(posX,0,80,200);

  if(myPort.available()>0){

    posX=myPort.read();//0~255

    println(posX);

  }

}

arduino:

void setup(){

   Serial.begin(9600);

}

void loop(){

  int value = analogRead(A0);//0~1023

  Serial.write(value/4);

  delay(20);

}

2. 目標: 第14週要做期末作品

程式碼

aduino



void setup(){
  Serial.begin(9600);
  pinMode(12, INPUT_PULLUP);
  pinMode(5, INPUT_PULLUP);
  pinMode(3, INPUT_PULLUP);
  pinMode(0, INPUT_PULLUP);
  pinMode(13,OUTPUT);
 
}
void loop(){
  int a=0;
  if(digitalRead(12)==LOW)a|=0x01; // Serial.println("up");
  if(digitalRead(5)==LOW) a|=0x02;//Serial.println("down");
  if(digitalRead(3)==LOW) a|=0x04;//Serial.println("left");
  if(digitalRead(0)==LOW) a|=0x08;//Serial.println("right");
  Serial.write(a);
 
  if(millis()%1000<500) digitalWrite(13, HIGH);
  else digitalWrite(13,LOW);
  delay(20);
}

processing.

import processing.serial.*;

Serial myPort;

void setup(){

  size(255+80,200);

  myPort=new Serial(this,"COM4",9600);

  

}

int posX=0;

int posY=0;

void draw(){

  background (255);

  int a=0;

  if(myPort.available()>0) a =myPort.read();

  if( (a&0x01)==0x01)posY+=10;///{println("up");}else println("no up");

  if( (a&0x02)==0x02)posY-=10;

  if( (a&0x04)==0x04)posX+=10;

  if( (a&0x08)==0x08)posX-=10;

  fill(#ff0000);rect(posX,posY,80,50);

  

}

week14

void setup(){

  pinMode(13,OUTPUT);

}

void loop(){

  int value=analogRead(A0);

  digitalWrite(13, HIGH);

  delay(value);

  digitalWrite(13, LOW);

  delay(value);

   

}

第14週上課內容

1.   旋鈕 (可變電阻) Analog Input
http://arduino.cc/en/pmwiki.php?n=Tutorial/AnalogInput

2.  第14週要做期末作品

week14

1. 目標: 旋鈕 (可變電阻) Analog Input
http://arduino.cc/en/pmwiki.php?n=Tutorial/AnalogInput

2. 目標: 第14週要做期末作品

week14

使用旋鈕控制方塊方向 

processing:

import processing.serial.*;

Serial myPort;

void setup(){

    size(255+80,200);

    myPort=new Serial(this,"COM4",9600);

}

int posX=0;

void draw(){

    background(255);

    fill(#ff0000);rect(posX,0,80,200);

    if(myPort.available()>0){

        posX=myPort.read();

        println(posX);

  }

}

arduino:

void setup(){

  Serial.begin(9600);

}

void loop(){

  int value = analogRead(A0);//0-1023

  Serial.write(value/4);

  delay(20);

}

WEEK14

 使用旋鈕控制燈泡閃爍頻率

第十四週課堂

Arduino旋鈕

void setup(){
pinMode(13,OUTPUT);
}

void loop(){
int value = analogRead(A0);
digitalWrite(13, HIGH);
delay(value);
digitalWrite(13, LOW);
delay(value);
}

可以控制LED燈閃爍的頻率!!

week14_01160333

HW14, Week14

 旋鈕 (可變電阻) Analog Input
http://arduino.cc/en/pmwiki.php?n=Tutorial/AnalogInput

轉動旋鈕可改變LED燈泡閃爍頻率

轉動旋鈕可控制物體左右方向

Week14

week14

旋鈕:運用

Processing:

import processing.serial.*;

Serial myPort;

void setup(){

    size(255+80,200);

    myPort=new Serial(this,"COM4",9600);

}

int posX=0;

void draw(){

    background(255);

    fill(#ff0000);rect(posX,0,80,200);

    if(myPort.available()>0){

        posX=myPort.read();

        println(posX);

  }

}

Arduino:

void setup(){

  Serial.begin(9600);

}

void loop(){

  int value = analogRead(A0);//0-1023

  Serial.write(value/4);

  delay(20);

}

week14

旋鈕&processing

第十四週課堂作業

旋鈕 (可變電阻) Analog Input

int sensorPin = A0;    // select the input pin for the potentiometer
int ledPin = 13;      // select the pin for the LED
int sensorValue = 0;  // variable to store the value coming from the sensor

void setup() {
  // declare the ledPin as an OUTPUT:
  pinMode(ledPin, OUTPUT);  
}

void loop() {
  // read the value from the sensor:
  sensorValue = analogRead(sensorPin);    
  // turn the ledPin on
  digitalWrite(ledPin, HIGH);  
  // stop the program for <sensorValue> milliseconds:
  delay(sensorValue);          
  // turn the ledPin off:        
  digitalWrite(ledPin, LOW);   
  // stop the program for for <sensorValue> milliseconds:
  delay(sensorValue);                  

}